The construction of thermal insulation mortar is usually mixed on the ground and lifted to the upper floor of the working part by elevator or tower crane, which occupies a long time of the elevator, and the construction speed is constrained by the lifting speed, which is difficult to improve.
Email: equip@lichmach.com
The construction of thermal insulation mortar is usually mixed on the ground and lifted to the upper floor of the working part by elevator or tower crane, which occupies a long time of the elevator, and the construction speed is constrained by the lifting speed, which is difficult to improve. Due to the large viscosity of this thermal insulation mortar, it is a viscous material with strong adhesion, not easy to collapse and flow, so it is not possible to use the existing mortar pumps or fine stone concrete pumps to carry out pumping operations.
According to the user’s requirements, LICHMACH launched a new type of conveying pump – adhesive powder polystyrene granule insulation mortar conveying pump, which is used for the construction work of high-rise buildings with adhesive powder polystyrene granule insulation mortar for casting polystyrene granule slurry, and also can be used for the conveying of foam concrete.
| Parameter | Model number | ||
| KB10 | KB15 | ||
| Theoretical pumping pressure(MPa) | High pressure | 4.5 | 5.3 |
| Low pressure | 2.3 | 2.8 | |
| Theoretical conveying capacity(m3/h) | High pressure | 5 | 7.5 |
| Low pressure | 9.4 | 14 | |
| Maximum conveying distance(m) | Height | 300 | 350 |
| verticle | 120 | 140 | |
| Power of main motor(KW) | 11 | 18.5 | |
| Hopper volume(m3) | 0.1 | 0.12 | |
| Feeding height(mm) | 1000 | 1200 | |
| Hydraulic oil tank volume(L) | 80 | 100 | |
| Distribution valve form | ball valves | ball valves | |
| Weigtht(Kg) | 500 | 820 | |
| Size L*W*H(mm) | 1785*960*1700 | 2090*1060*2350 | |
Contact With Us
If you have any questions please fell free to contact with us.